Follow up of space charge distributions in HVDC cable during a Pre-Qualification test using the Pulse ElectroAcoustic technique and the Thermal Step Method

2019-08-26T08:40:47+02:00June 26th, 2019|HVDC Cable Systems, Publications|

In order to better understand the evolution of space charge and electric field distortions during the application of electro-thermal stresses to a HVDC cable system, the present paper shows the follow up of periodic space charge characterizations on a HVDC cable during part of a Pre-Qualification test using both the Pulse ElectroAcoustic technique and the Thermal Step Method. The focus is on the evolution of space charges distributions during load cycles and high load sequences according to the Cigré TB496 recommendation.

Case Study of Non-Isolated MMC DC-DC Converter in HVDC Grids

2019-09-02T14:37:59+02:00June 7th, 2019|Power Electronics & Converters, Publications|

This article presents the topology for non-isolated MMC-based DC-DC converter. The initial design study illustrates that such DC/DC converter will have overall semiconductor count comparable to a MMC AC-DC (used with HVDC transmission) converter of similar rating. A full controller schematic is presented and operating principles are discussed.

Comparaison de mesures de conductivité obtenues par spectroscopie diélectrique et mesure de courant sous tension continue sur une résine époxy

2023-01-31T13:27:44+01:00June 6th, 2019|High Voltage Substation Equipment, HVDC Cable Systems, Publications|

De par sa facilité d’utilisation et sa capacité à isoler la permittivité complexe représentant les pertes dans un matériau tout en faisant un balayage fréquentiel, la spectroscopie diélectrique semble être une méthode de choix pour obtenir la valeur de conductivité ohmique d’un matériau. Cette méthode pourrait permettre de s’affranchir des temps conséquents de stabilisation généralement associés aux mesures de conductivité issues de courbes courant-tension effectuées suivant la norme IEC 62631-3. Par l’intermédiaire d’une comparaison entre ces 2 méthodes, les auteurs vont revenir sur les limites de chacune d’entre elle.

Go to Top