PhD Houssem Eddine NECHMI “Research of gas/ gas mixture without sulfur hexafluoride for High Voltage Insulation applications”

2018-10-08T14:44:52+02:00January 31st, 2017|High Voltage Substation Equipment, Phd|

SULPHUR hexafluoride, SF6, is the most common compressed gas used in high voltage power equipment since the 1950s and in HV transmissions and substations applications (GIS, GCB, GIL …), SF6 holds a prominent place because of its dielectric and chemical performance (high dielectric strength, non-toxicity, low condensation temperature, thermal stability, non-flammability, chemical inactivity with the other constituent materials of the apparatus, availability and moderate cost). It is one of the best insulators gas known today.

PhD Houssem Eddine NECHMI “Research of gas/ gas mixture without sulfur hexafluoride for High Voltage Insulation applications”

2021-08-11T17:44:29+02:00January 31st, 2017|Appareillage électrique haute tension, Phd|

SULPHUR hexafluoride, SF6, is the most common compressed gas used in high voltage power equipment since the 1950s and in HV transmissions and substations applications (GIS, GCB, GIL …), SF6 holds a prominent place because of its dielectric and chemical performance (high dielectric strength, non-toxicity, low condensation temperature, thermal stability, non-flammability, chemical inactivity with the other constituent materials of the apparatus, availability and moderate cost). It is one of the best insulators gas known today.

TM1 test rig renovation

2018-08-09T17:46:23+02:00January 23rd, 2017|Stabilisation & stockage|

Why do we stil need experimental test-rigs in hydraulic sciences? We use extensively computatinal sciences to estiate performances of runners. Although it is accurate, Computatinal Fluid Dynamics (CFD) need to be checked with experimental data especially for cavitatin and transients. For that reason when prototype machines are greater than 5 MW or larger than 3 m of diameter it is mandatory to estiate on reduced scaled model with a great accuracy performances according to IEC 60193.

TM1 test rig renovation

2021-08-11T18:09:13+02:00January 23rd, 2017|Stabilisation & stockage|

Why do we stil need experimental test-rigs in hydraulic sciences? We use extensively computatinal sciences to estiate performances of runners. Although it is accurate, Computatinal Fluid Dynamics (CFD) need to be checked with experimental data especially for cavitatin and transients. For that reason when prototype machines are greater than 5 MW or larger than 3 m of diameter it is mandatory to estiate on reduced scaled model with a great accuracy performances according to IEC 60193.

SGI participation to IAHR Conference

2018-08-09T17:46:25+02:00January 18th, 2017|Conference, Event, Stabilization & Storage|

The International Association for Hydro-Environment Engineering and Research (IAHR), founded in 1935, is a worldwide independent organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. The 28th IAHR Symposium on Hydraulic Machinery and Systems took place in Grenoble on July.

SGI participation to IAHR Conference

2021-08-11T16:31:35+02:00January 18th, 2017|Conference, Evenement, Stabilisation & stockage|

The International Association for Hydro-Environment Engineering and Research (IAHR), founded in 1935, is a worldwide independent organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. The 28th IAHR Symposium on Hydraulic Machinery and Systems took place in Grenoble on July.

SGI participation to European Power Electronics Conference (ECCE Europe, EPE2016)

2018-08-09T17:46:26+02:00January 18th, 2017|Conference, Event, Supergrid Architecture & Systems|

EPE ECCE Europe is the largest conference on power electronics and its applications. SuperGrid Institute targeted this conference to enlighten its research and results for HVDC, MTDC and grid related subjects.

SGI participation to European Power Electronics Conference (ECCE Europe, EPE2016)

2021-08-11T16:31:47+02:00January 18th, 2017|Architecture & systèmes du supergrid, Conference, Evenement|

EPE ECCE Europe is the largest conference on power electronics and its applications. SuperGrid Institute targeted this conference to enlighten its research and results for HVDC, MTDC and grid related subjects.

SuperGrid Institute Part of H2020 European Project PROMOTioN

2018-08-09T17:46:28+02:00January 18th, 2017|Funding, Supergrid Architecture & Systems|

PROMOTioN is a 4 years project starting January 2016, with a 40 M€ EU funding, involving 35 Industrial and Academics Participants. It aims to develop meshed HVDC offshore grids on the basis of cost-effective and reliable technological innovation, in combination with a sound political, financial and legal regulatory framework.

SuperGrid Institute Part of H2020 European Project PROMOTioN

2021-08-11T17:55:53+02:00January 18th, 2017|Architecture & systèmes du supergrid, Financement|

PROMOTioN is a 4 years project starting January 2016, with a 40 M€ EU funding, involving 35 Industrial and Academics Participants. It aims to develop meshed HVDC offshore grids on the basis of cost-effective and reliable technological innovation, in combination with a sound political, financial and legal regulatory framework.

Go to Top