window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'UA-117423629-2');

A DC voltage source for long term GIS testing designed by SuperGrid Institute

2021-08-11T17:51:21+02:00novembre 29th, 2019|Appareillage électrique haute tension|

As part of its research, SuperGrid Institute studies the phenomena of partial discharge under DC voltage. Environmental issues emphasised in the European project PROMOTioN encourage the exploration for possible replacement of SF6 gas and remains a strong component of the study at SuperGrid Institute.

Françoise Lamnabhi-Lagarrigue has been awarded the Irène Joliot-Curie 2019 Prize in the Female Scientist of the Year category

2021-08-11T16:27:31+02:00novembre 27th, 2019|Architecture & systèmes du supergrid, Evenement|

Françoise Lamnabhi-Lagarrigue has been awarded the Irène Joliot-Curie 2019 Prize in the Female Scientist of the Year category. Congratulations to Françoise for this acclaimed recognition of her work!

SuperGrid Institute’s « Technical days »: an event dedicated to our industrial shareholders

2021-08-11T16:27:43+02:00novembre 22nd, 2019|Evenement|

SuperGrid Institute has held its first ever ‘Technical days’ event! Dedicated to our industrial shareholders, this event was organised to facilitate exchange and to allow us to better adapt our roadmap to the industry’s tangible needs. These two exciting days of workshops, discussions and networking have bolstered our belief in the importance of our mission to shape tomorrow’s HV & MV power transmission grids.

Design and validation tests of 320kV HVDC GIL/GIS

2021-08-11T16:42:46+02:00novembre 21st, 2019|Appareillage électrique haute tension, Publications|

This paper gives an overview of electrical DC phenomena in GIL/GIS, the influence of insulating properties of SF6 and filled epoxy resin, and design of new support insulator for 320kV HVDC GIL/GIS. The busbar system including the insulator was designed not only to satisfy all standard requirements such as mechanical, temperature rise, heating cycle performance but also particular requirements for HVDC applications such as superimposed impulse tests. Finally and for the first time at actual scale, type test according to CIGRE JWG D1/B3.57 was conducted in EDF R&D Les Renardières laboratory to verify the design and insulating performance of the 320kV HVDC GIL/GIS system. The satisfactory results allow to confirm the high technology readiness level of HVDC GIL/GIS.

Phd Raphael CHASSAGNOUX « Dielectric study of liquid and boiling nitrogen – Application to a superconducting fault current limiter »

2021-08-11T17:42:17+02:00novembre 14th, 2019|Appareillage électrique haute tension, Phd|

The increasing number of interconnections in electrical networks and the massive integration of renewable energies nowadays comes with an increase of short circuit currents, and more constraints on high voltage circuit breaker during the current clearance. To solve this problem, a solution consists in inserting a fault current limiting device on electrical lines. Among the available technologies, the superconducting fault current limiter is ideal from the perspective of transmission system operator. However the design of this device is non-trivial, especially the electrical insulation, which is very specific to this apparatus: electrical insulation in a cryogenic environment (liquid nitrogen at - 196°C), superconducting tapes inducing electric field reinforcement, and strong transient heating generating numerous vapor bubbles.

Phd Alexis FOUINEAU « Medium Frequency Transformers design methodologies for high voltage grids and railway grids »

2021-08-11T17:42:21+02:00novembre 13th, 2019|Appareillage électrique haute tension, Phd|

Medium Frequency Transformers (MFT) are an innovative technology compared to low frequency transformers, with the promise of reduced volume and increased efficiency. This PhD thesis focuses in particular on their design for high voltage, high power applications, such as high voltage and medium voltage DC networks, as well as railway networks. In these applications, MFTs are used in converters that can generate specific constraints to be taken into account during their design: non-sinusoidal signals, polarization voltage, target inductance values.

Go to Top