Once you have selected one of our technologies, we provide support throughout the maturation process before proceeding to the final technology transfer phase.
Accurate estimation of VFTO in GIS substations.
>> More information
High fidelity rational fitting of frequency transfer function with time delay, ensuring model passivity.
Speed controlled Disconnector.
Parallel RLC Resonator Circuit.
Development and dimensioning of HVDC GIL and GIS requires deep knowledge on electric field distribution in the gas/solid insulating systems.
For series connected devices.
Evaluating the impact of embedded DC grids.
Assessment of existing solutions, proposition of enhanced grid forming control and umbilical cable free black start strategy.
AC-DC system stability control.
Converter stations coordination principles.
Fast, precise and robust arm currents control.
Pipelined bitonic sorting implemented on FPGA.
Simple device adaptable to any requirement in terms of current and voltage reversibility.
A novel concept for DC Grid Stabilization.
Real-time calculation of available energy.
Generic solution for interline PFC devices embedded in HVDC grids.
Over & Under Voltage Containment Reserves.
Optimal Primary Voltage Control and Voltage Droop Parameter Selection.
The proposed control law uses some symmetry properties of the MMC to simplify and distribute the control algorithm.
The work was focused on the development of a working control law for series bridge converter.
Modelling, control and simulations of dc/dc converters.
The proposed solution consists in controlling the converter to make the HV current going to zero and using a switch.
A novel distributed supplementary control of MTDC grids for static and dynamic stability enhancement of AC/DC systems, aiming to minimize the interaction with the DC voltage.
This study helps to design embedded ES-SMs in the converter to provide new functions like ancillary services for power system operation.
Based on discrete event systems theory and classification of operational states.
Reconfiguration device for basic Power Flow Controllers to reach all operating areas.
A solution to enhance the maintenance of the submodule.
The proposed circuit is based on a “Flyback” type architecture, incorporating the self-starting principle of the power switch control circuit.
High Voltage Breaking &Protection
A robust DC grid protection strategy at an aﬀordable cost.
A novel strategy for HVDC bipole and asymmetrical monopole line fast re-energizaton using half-bridge MMC internal energy.
An adaptation of the strategy for HVDC lines fast re-energization using half-bridge MMC internal energy for symmetrical monopoles.
Symmetric monopole HVDC fault management.
Feasibility, performance and risk evaluation methods and tools.
Direct Current Circuit Breaker (DCCB) is a device which interrupts the Direct Current and eliminates a fault in a High Voltage transmission network or Medium Voltage distribution network.
Cost-efficient HVDC grid protection strategy for networks combining cable and overhead lines
Ultra-fast single ended protection scheme based on travelling waves.
Package “Topology studies”.
Package “Converter control”.
Package “ Medium Frequency Transformers”.
Package “ Power modules”.
Package “ Converter”.
A cost-optimised solution to interface the controller.
Partial discharges and breakdown voltage measurements.
Software framework for cost effective design and simulation.
A prototype of a Novec 649 diphasic thermosiphon have been developed to demonstrate principle of operation.
Package “ Topology studies”.
Package “ Converter control”.
Package “Medium Frequency Transformer concept”.
Package “Power modules & Gate drivers”.
An solution to enhance the voltage whistand rating of commercial power modules.
Partial Discharge verification.
Package “PiN diodes”.
The proposed method allows control of the converter output voltage through regulation of the input current, this control is accomplished by the combined input stage.
SuperGrid Institute has patented an active filtering solution, buffering the AC power generated by railway on-board converters supplying traction DC buses through a low frequency transformer and rectifiers.
The power electronic traction transformer (PETT) topology is composed of n cells connected in input in series and in output in parallel.
Battery to power the dead bands of hydraulic turbines.
S-shape calculation time reduction.
Innovative electrical architecture.
Access new energy markets with a hybrid pump-turbine.
23 rue Cyprian
Phone: +33 4 28 01 23 23
⇒ Email us
By submitting this form, I agree that my information may be processed by SuperGrid Institute to manage my requests and to contact me.
The information collected in the completed form is saved by SuperGrid Institute in a computer file.
The data collected will only be communicated to the departments at SuperGrid Institute concerned by the treatment of your requests.
The data may be kept for a period of one (1) year after the submission of this form.
You may exercise your right to access, correct (notably if there are inaccuracies in the data collected), delete, limit the processing of or oppose the processing of your personal data, under the conditions provided for in Articles 15 to 21 of the European Regulation of the 27th April 2016 (UE 2016/679) on the protection of individuals in regards to the protection of their personal data.
To exercise these rights or for any other question about the treatment of your data, you can contact our Data Protection Officer : email@example.com.
For any additional information or complaints, you can contact the Commission Nationale de l’Informatique et des Libertés (more information at www.cnil.fr).